Residential Roof Repair

Background:  Septic vent pipes typically stick out the back slope of your roof and ventilate your home’s septic system.  A pipe boot/jack is installed over top of the pipe.  The tight fit of the rubber keeps it watertight.  Over time, the rubber shrinks and dry rots which allows water to get down the pipe causing a leak.

Repair:  When the dome of the boot and the surrounding area of shingles and sheeting are not compromised a repair gasket or collar can be installed over top of the pipe to seal the area.  This will provide leak protection until the roof is replaced.  If the leak has caused damage to the surrounding area and plywood, at that point, the entire pipe boot would need to be replaced.

Background:  Septic vent pipes typically stick out the back slope of your roof and ventilate your home’s septic system.  A pipe boot/jack is installed over top of the pipe.  The tight fit of the rubber keeps it water tight.  Over time, the rubber shrinks and dry rots which allows water to get down the pipe causing a leak.

Repair:  When a repair collar is not an appropriate fix due to the condition of the boot or surrounding area, the entire boot would need to be replaced. 

1. Remove the shingles surrounding the boot. 
2. Inspect for wood rot and replace. 
3. Install a rubber membrane around the pipe.
4. Install the new pipe boot
5. Install new shingles to match as close as possible

Background:  Ridge vents exhaust the attic air through the top of the roof.  Proper ventilation is good for the home, health of the attic and life expectancy of the roof.  Metal ridge vent & rolled ridge vents are the most problematic.  Metal ridge vents are light and made of aluminum.  Winds make them vibrate and chatter which backs the nails out.  The entire ridge vent or end caps can come dislodged.  Rolled ridge vents are similar to a Brillo pad material and have no structural integrity which can allow for squirrels and other pests to get into the attic.  The scrim or Brillo pad like material can also get clogged and restrict air flow over time.

Repair:  Install a new exterior baffled ridge vent with manufacturer ridge vents.  All nails must be nailed down by hand as it requires a

Benefits of Ridge Ventilation

Air movement is the key to efficient ventilation to help eliminate damaging conditions in your attic. Ridge vents provide constant airflow along the entire underside of the roof to help remove heat and moisture.

Attic and roof temperatures can soar as high as 160 degrees in the summer. This over heated air can damage roof structures and shingles, as well as increase cooling costs in the home. Ridge ventilation can create an airflow to remove this over heated air.

Excess moisture can be as damaging as too much heat. In today’s tightly constructed homes, moisture can accumulate in the attic causing mold, mildew and wood rot. Ridge vent systems work year round to ventilate the attic.

Heat and moisture combine to damage shingles, trusses, rafters, roof deck and painted surfaces. Ridge ventilation can help extend the life of shingles and the roof structure.